Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
   8.1. Adjustment of drum-type brakes
   8.2. A pedal
   8.3. The switch of a signal of braking
   8.4. The main cylinder of brakes
   8.5. The vacuum amplifier of brakes
   8.6. Dosing out valves
   8.7. Hoses of brakes
   8.8. Removal of air from a hydrodrive of brakes
   8.9. Disk brakes
   8.10. A brake support
   8.11. A brake disk
   8.12. Drum-type brakes
   8.13. Antiblocking system of brakes of back wheels
   8.14. Specifications of brakes
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Brake system>> Brake support

8.10. A brake support

Removal and installation

FORWARD BRAKES

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove a wheel.
3. Disconnect and muffle a hose.
4. Turn out bolts and remove a support (on a part of cars it is necessary to remove also an arm).
5. Installation is carried out upside-down. Tighten bolts with the moment 33 Н.м.
6. Remove air from a hydrodrive.

BACK BRAKES

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove a wheel.
3. Disconnect and muffle a hose.
4. Disconnect a cable of a manual brake from a forward cable, get from an arm a cover of a cable and disconnect a cable from the lever.
5. Turn out bolts and remove a support.
6. Installation is carried out upside-down. Tighten bolts with the moment 18 Н.м.
7. Remove air from a hydrodrive. Adjust a manual brake.