Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
   8.1. Adjustment of drum-type brakes
   8.2. A pedal
   8.3. The switch of a signal of braking
   8.4. The main cylinder of brakes
   8.5. The vacuum amplifier of brakes
   8.6. Dosing out valves
   8.7. Hoses of brakes
   8.8. Removal of air from a hydrodrive of brakes
   8.9. Disk brakes
   8.10. A brake support
   8.11. A brake disk
   8.12. Drum-type brakes
   8.13. Antiblocking system of brakes of back wheels
   8.14. Specifications of brakes
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Brake system>> Brake disk

8.11. A brake disk
THE GENERAL DATA

On cars "Isuzu" disks of two types are established. Disks of the first type demountable, fasten on a nave nuts. These disks are established basically on brakes of back wheels. Disks of the second type not folding, are executed at the same time with a wheel nave. To remove such disk, it is necessary to remove a cap, to turn away a nut of a nave and to get the external bearing.

Removal and installation

DISKS OF 1 TH TYPE

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove a wheel.
3. Remove a support and an arm.
4. Remove a disk.
5. Installation is carried out upside-down.

DISKS OF 2 TH TYPE

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Remove a wheel.
3. Remove a support and an arm.
4. Remove a dustproof cover, расшплинтуйте a nave nut. Turn away a nut, remove a washer and get the external bearing.
5. Remove a disk with a nave and the internal bearing.
6. If the disk is ground, get the internal bearing. Before installation carefully wash out a nave.
7. Installation is carried out upside-down. Adjust bearings and replace шплинт.