Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
   8.1. Adjustment of drum-type brakes
   8.2. A pedal
   8.3. The switch of a signal of braking
   8.4. The main cylinder of brakes
   8.5. The vacuum amplifier of brakes
   8.6. Dosing out valves
   8.7. Hoses of brakes
   8.8. Removal of air from a hydrodrive of brakes
   8.9. Disk brakes
   8.10. A brake support
   8.11. A brake disk
   8.12. Drum-type brakes
   8.13. Antiblocking system of brakes of back wheels
      8.13.1. Features of self-diagnostics
      8.13.2. Units of antiblocking system
   8.14. Specifications of brakes
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes





Isuzu Trooper>> Brake system>> Antiblocking system of brakes of back wheels>> Units of antiblocking system

8.13.2. Units of antiblocking system
THE GENERAL DATA

Arrangement of units of antiblocking system

1 – the gauge of speed
2 – the back bridge
3 – a back channel of the chassis
4 – a pressure regulator
5 – the floor panel on the right side
6 – processor block ECM

7 – the differential relay of pressure
8 – the switch of a lay lantern
9 – a safety lock 7 (10А)
10 – a pressure regulator
11 – отсечной the valve
12 – редукционный the valve
13 – the battery
14 – the main safety lock (60А)
15 – the ignition switch
16 – a safety lock 2 (10А)
17 – conclusion АСС of the lock of ignition
18 – a safety lock 14 (20А)
19 – the processor module of system
20 – the switch of a signal of braking
21 – to the switch of a signal of braking
22 – the gauge of speed
23 – diagnostic conclusions
24 – diagnostic conclusions
25 – to a control lamp of inclusion of both leading bridges
26 – the switch of a control lamp of leading bridges
27 – a socket on the processor block
28 – a socket of a cable of the processor block

Antiblocking system of back wheels (assembly diagramme)

1 – the switch of a signal of braking
2 – a food +12 In
3 – the processor block
4 – weight
a – the gauge of speed
5 – a hydraulic highway
6 – wires
7 – a receiver
8 – редукционный the valve
9 – отсечной the valve
10 – a pressure regulator
11 – the combined valve
12 – to brakes of forward wheels
13 – the differential relay of pressure
14 – the main cylinder of brakes

Sequence of impulses of a diagnostic code of antiblocking system


PROCESSOR BLOCK RWAL-SISTEMY

Removal and installation

 
1 – a seat of the passenger
2 – a cable socket
3 – an arm

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a seat of the passenger.
3. Disconnect from the processor block a cable socket.
4. Remove an arm and the processor block.
5. Installation is carried out upside-down. Tighten a bolt of an arm with the moment 36 Н.м.

PRESSURE REGULATOR (РЕДУКЦИОННЫЙ AND ОТСЕЧНОЙ THE VALVE)

Removal and installation

 
1 – a socket of drives
2 – tubes of a highway of brakes
3 – a bolt
4 – a pressure regulator

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect from a regulator of pressure a socket of wires.
3. Disconnect tubes of a highway of brakes, keeping an alligator wrench.
4. Turn away a bolt and remove a regulator from the chassis.
5. Installation is carried out upside-down. Tighten a bolt with the moment 15 Н.м.

THE GAUGE OF SPEED OF ROTATION OF THE WHEEL

Removal and installation

 
1 – a socket
2 – a bolt
3 – the gauge

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect from the gauge of pressure a socket of wires.
3. Turn away a bolt and remove the gauge.
4. Installation is carried out upside-down. Tighten a bolt with the moment 22 Н.м.