Isuzu Truper - Isuzu Trooper
1. The maintenance instruction
2. Maintenance service
3. Engines
4. System of decrease in toxicity
5. Fuel system
6. Transmission and a running gear
7. A suspension bracket and a steering
8. Brake system
   8.1. Adjustment of drum-type brakes
   8.2. A pedal
   8.3. The switch of a signal of braking
   8.4. The main cylinder of brakes
   8.5. The vacuum amplifier of brakes
   8.6. Dosing out valves
   8.7. Hoses of brakes
   8.8. Removal of air from a hydrodrive of brakes
   8.9. Disk brakes
   8.10. A brake support
   8.11. A brake disk
   8.12. Drum-type brakes
   8.13. Antiblocking system of brakes of back wheels
   8.14. Specifications of brakes
9. A body
10. A body electric equipment
11. Diagnostics of malfunctions
12. Electroschemes

Isuzu Trooper>> Brake system>> Hoses of brakes

8.7. Hoses of brakes

Hose of brakes and an installation detail

1 – to the main cylinder

2 – скоба

3 – to a support


1. Lift the car and establish on supports. Remove wheels.
2. Clear the union of hoses of a dust and a dirt.
3. Disconnect the union of tubes of a highway of a hydrodrive of brakes from hoses. At отворачивании tubes and arms not to bend. For отворачивания unions it is recommended to moisten connection by a getting liquid. Substitute a vessel.
4. Get скобу from a groove on an arm. Disconnect a hose from an arm.
5. Disconnect a hose from a support.


1. Attach both tips of a hose, establish скобу and tighten the union of a hose with the moment 15 Н.м.
2. Establish wheels, be convinced that the hose does not touch a wheel or suspension bracket details, if necessary ослабьте the union and correct a hose.
3. Remove air from a hydrodrive of brakes.