Isuzu Trooper>> Body>> Cowl

9.2. A cowl

Car Amigo/MU/Trooper cowl

1 – loops of a cowl and fastening bolts
2 – a cowl
3 – a headlight
4 – a decorative lattice
5 – a forward bumper
6 – the index of turns
7 – a wheel niche
8 – a cowl prop
9 – a forward wing

Car Trooper/Bighorn cowl

1 – a decorative lattice
2 – a cowl
3 – the cowl lock
4 – a clamp in gathering
5 – a cable of a drive of the lock of a cowl
6 – a forward bumper
7 – a forward wing


1. Put adjusting labels of loops of a cowl.
2. Disconnect a socket of a wire of a lamp of illumination of a motor compartment (if it is provided).
3. Disconnect a rack or a cowl prop, having turned away bolts of a rack or having removed a prop.
4. Turn away bolts of loops and remove a cowl.


1. Establish a cowl and combine the labels put at dismantling.
2. Wrap bolts of fastening of loops, tighten bolts a little. Bolts not to tighten.
3. Close a cowl and check up correctness of installation. A cowl not to slam, as after removal adjustment is required.
4. Open a cowl and adjust so that the cowl was заподлицо with a surface of a body and the backlash in an aperture was identical on perimetre. It can be necessary for adjustment to lay linings.
5. After adjustment tighten bolts with the moment 22–30 Н.м