Isuzu Trooper>> Body>> Salon

9.8. Salon

9.8.1. Panels of doors

The panel of a door of car Amigo/MU/Jazz

The door panel of car Trooper/Bighorn

1 – an armrest

2 – the handle стеклоподъемника

3 – a water filter

Removal and installation

1. Turn away screws of fastening of armrests.
2. Hook and remove the handle стеклоподъемника.
3. Turn away screws and remove an overlay of the door handle and a decorative overlay.
4. Turn away all screws of fastening of the panel.
5. Hook and wring out the panel from a door skeleton to get the latches hidden in the panel.
6. Displace the panel vertically upwards and deduce bottom скобы from gearing with a door skeleton.
7. If the door is equipped стеклоподъемником (or the lock) with the electric drive for access to wires the door panel should be removed first of all. Thus the panel should not be removed completely, and only to displace to such degree, to provide access to conducting.
8. Before installation remove all latches which have remained in a door skeleton and establish them on the panel.
9. Installation is carried out upside-down.